---name: automotive-expertversion: 1.1.0description: >-category: domainstags: [automotive, connected-car, fleet, telematics, adas, vehicle]allowed-tools: ---

Automotive Expert

Expert guidance for automotive systems, connected vehicles, fleet management, telematics, advanced driver assistance systems (ADAS), and automotive software development.

Core Concepts

Automotive Systems

• Telematics and fleet management
• Connected car platforms
• Advanced Driver Assistance Systems (ADAS)
• Electric Vehicle (EV) management
• Vehicle-to-Everything (V2X) communication
• Infotainment systems
• Diagnostic systems (OBD-II)

Technologies

• CAN bus and automotive networks
• AUTOSAR architecture
• Over-the-air (OTA) updates
• Autonomous driving systems
• Battery management systems
• Computer vision for ADAS
• Edge computing in vehicles

Standards and Protocols

• ISO 26262 (functional safety)
• AUTOSAR (automotive software architecture)
• J1939 (heavy-duty vehicle communication)
• UDS (Unified Diagnostic Services)
• SOME/IP (service-oriented middleware)
• MQTT for telematics
• CAN, LIN, FlexRay protocols

Connected Vehicle Platform

@dataclass
class VehicleTelemetry:
    """Real-time vehicle telemetry data"""
    vehicle_id: str
    timestamp: datetime
    location: tuple
    speed_kmh: float
    rpm: int
    engine_temp_c: float
    battery_voltage: float
    fuel_level_percent: float
    odometer_km: int
    dtc_codes: List[str]  # Diagnostic Trouble Codes

class ConnectedVehiclePlatform:
    """Connected car platform with OTA updates"""

    def __init__(self):
        self.vehicles = {}
        self.telemetry_buffer = []
        self.ota_updates = {}

    def process_telemetry(self, telemetry: VehicleTelemetry) -> dict:
        """Process incoming telemetry data"""
        self.telemetry_buffer.append(telemetry)

        # Analyze telemetry for anomalies
        alerts = []

        # Check engine temperature
        if telemetry.engine_temp_c > 110:
            alerts.append({
                'type': 'high_engine_temp',
                'severity': 'warning',
                'value': telemetry.engine_temp_c,
                'message': 'Engine temperature above normal'
            })

        # Check battery voltage
        if telemetry.battery_voltage < 12.0:
            alerts.append({
                'type': 'low_battery',
                'severity': 'warning',
                'value': telemetry.battery_voltage,
                'message': 'Battery voltage low'
            })

        # Check for diagnostic trouble codes
        if telemetry.dtc_codes:
            alerts.append({
                'type': 'dtc_codes',
                'severity': 'critical',
                'codes': telemetry.dtc_codes,
                'message': f'{len(telemetry.dtc_codes)} diagnostic code(s) detected'
            })

        # Check for harsh driving
        if len(self.telemetry_buffer) >= 2:
            prev = self.telemetry_buffer[-2]
            if telemetry.vehicle_id == prev.vehicle_id:
                time_diff = (telemetry.timestamp - prev.timestamp).total_seconds()
                if time_diff > 0:
                    acceleration = (telemetry.speed_kmh - prev.speed_kmh) / time_diff

                    if abs(acceleration) > 5:  # > 5 km/h per second
                        alerts.append({
                            'type': 'harsh_driving',
                            'severity': 'info',
                            'acceleration': acceleration,
                            'message': 'Harsh acceleration/braking detected'
                        })

        return {
            'vehicle_id': telemetry.vehicle_id,
            'timestamp': telemetry.timestamp.isoformat(),
            'alerts': alerts,
            'health_score': self._calculate_vehicle_health(telemetry)
        }

    def deploy_ota_update(self,
                         vehicle_ids: List[str],
                         update_package: dict) -> dict:
        """Deploy over-the-air software update"""
        update_id = self._generate_update_id()

        ota_update = {
            'update_id': update_id,
            'version': update_package['version'],
            'description': update_package['description'],
            'package_size_mb': update_package['size_mb'],
            'target_vehicles': vehicle_ids,
            'deployed_at': datetime.now(),
            'status_by_vehicle': {}
        }

        for vehicle_id in vehicle_ids:
            # Schedule update for vehicle
            ota_update['status_by_vehicle'][vehicle_id] = {
                'status': 'scheduled',
                'download_progress': 0,
                'install_progress': 0
            }

        self.ota_updates[update_id] = ota_update

        return {
            'update_id': update_id,
            'vehicles_targeted': len(vehicle_ids),
            'estimated_completion': 'Within 48 hours'
        }

    def diagnose_vehicle(self, vehicle_id: str, dtc_codes: List[str]) -> dict:
        """Diagnose vehicle issues from DTC codes"""
        diagnoses = []

        for code in dtc_codes:
            diagnosis = self._lookup_dtc_code(code)
            diagnoses.append(diagnosis)

        # Calculate severity
        max_severity = max(d['severity'] for d in diagnoses)

        return {
            'vehicle_id': vehicle_id,
            'dtc_codes': dtc_codes,
            'diagnoses': diagnoses,
            'overall_severity': max_severity,
            'service_recommended': max_severity in ['high', 'critical']
        }

    def _calculate_vehicle_health(self, telemetry: VehicleTelemetry) -> float:
        """Calculate overall vehicle health score"""
        score = 100.0

        # Engine temperature
        if telemetry.engine_temp_c > 110:
            score -= 15
        elif telemetry.engine_temp_c > 100:
            score -= 5

        # Battery voltage
        if telemetry.battery_voltage < 11.5:
            score -= 20
        elif telemetry.battery_voltage < 12.0:
            score -= 10

        # DTC codes
        score -= len(telemetry.dtc_codes) * 15

        return max(0.0, score)

    def _lookup_dtc_code(self, code: str) -> dict:
        """Lookup diagnostic trouble code"""
        # Simplified DTC lookup
        # In production, would use comprehensive OBD-II code database

        dtc_database = {
            'P0171': {
                'description': 'System Too Lean (Bank 1)',
                'severity': 'medium',
                'possible_causes': ['Vacuum leak', 'Faulty MAF sensor', 'Fuel filter clogged']
            },
            'P0300': {
                'description': 'Random/Multiple Cylinder Misfire Detected',
                'severity': 'high',
                'possible_causes': ['Faulty spark plugs', 'Ignition coil failure', 'Fuel injector issue']
            }
        }

        return dtc_database.get(code, {
            'description': f'Unknown code: {code}',
            'severity': 'medium',
            'possible_causes': ['Requires diagnostic scan']
        })

    def _generate_update_id(self) -> str:
        import uuid
        return f"OTA-{uuid.uuid4().hex[:8].upper()}"

Electric Vehicle Management

class ElectricVehicleManagement:
    """EV-specific management functions"""

    def __init__(self):
        self.charging_stations = {}
        self.charging_sessions = []

    def calculate_range(self,
                       battery_capacity_kwh: float,
                       battery_soc_percent: float,
                       consumption_kwh_per_km: float) -> dict:
        """Calculate remaining range for EV"""
        available_energy = battery_capacity_kwh * (battery_soc_percent / 100)
        range_km = available_energy / consumption_kwh_per_km

        # Adjust for temperature (simplified)
        # Cold weather reduces range by up to 40%
        temperature_factor = 0.8  # Assume moderate conditions

        adjusted_range = range_km * temperature_factor

        return {
            'nominal_range_km': range_km,
            'adjusted_range_km': adjusted_range,
            'battery_soc_percent': battery_soc_percent,
            'available_energy_kwh': available_energy
        }

    def find_charging_stations(self,
                              current_location: tuple,
                              max_distance_km: float) -> List[dict]:
        """Find nearby charging stations"""
        nearby_stations = []

        for station_id, station in self.charging_stations.items():
            distance = self._calculate_distance(current_location, station['location'])

            if distance <= max_distance_km:
                nearby_stations.append({
                    'station_id': station_id,
                    'name': station['name'],
                    'location': station['location'],
                    'distance_km': distance,
                    'available_chargers': station['available_chargers'],
                    'charging_speed_kw': station['max_power_kw'],
                    'cost_per_kwh': station['cost_per_kwh']
                })

        # Sort by distance
        nearby_stations.sort(key=lambda x: x['distance_km'])

        return nearby_stations

    def optimize_charging_schedule(self,
                                  battery_capacity_kwh: float,
                                  current_soc_percent: float,
                                  target_soc_percent: float,
                                  departure_time: datetime) -> dict:
        """Optimize EV charging schedule based on electricity rates"""
        energy_needed = battery_capacity_kwh * ((target_soc_percent - current_soc_percent) / 100)

        # Get electricity rate schedule
        rate_schedule = self._get_electricity_rates(departure_time)

        # Find lowest rate period
        optimal_period = min(rate_schedule, key=lambda x: x['rate'])

        charging_duration_hours = energy_needed / 7.0  # Assume 7kW home charger

        return {
            'energy_needed_kwh': energy_needed,
            'optimal_start_time': optimal_period['start_time'].isoformat(),
            'charging_duration_hours': charging_duration_hours,
            'estimated_cost': energy_needed * float(optimal_period['rate']),
            'will_complete_by': (optimal_period['start_time'] +
                               timedelta(hours=charging_duration_hours)).isoformat()
        }

    def _calculate_distance(self, point1: tuple, point2: tuple) -> float:
        """Calculate distance between two points"""
        from math import radians, sin, cos, sqrt, atan2

        lat1, lon1 = radians(point1[0]), radians(point1[1])
        lat2, lon2 = radians(point2[0]), radians(point2[1])

        dlat = lat2 - lat1
        dlon = lon2 - lon1

        a = sin(dlat/2)**2 + cos(lat1) * cos(lat2) * sin(dlon/2)**2
        c = 2 * atan2(sqrt(a), sqrt(1-a))

        return 6371 * c  # Earth radius in km

    def _get_electricity_rates(self, date: datetime) -> List[dict]:
        """Get time-of-use electricity rates"""
        # Simplified rate schedule
        # Off-peak: 11 PM - 7 AM
        # Peak: 2 PM - 8 PM
        # Mid-peak: all other times

        return [
            {
                'start_time': date.replace(hour=23, minute=0),
                'end_time': date.replace(hour=7, minute=0) + timedelta(days=1),
                'rate': Decimal('0.08')  # $0.08/kWh
            },
            {
                'start_time': date.replace(hour=14, minute=0),
                'end_time': date.replace(hour=20, minute=0),
                'rate': Decimal('0.25')  # $0.25/kWh
            }
        ]

Best Practices

Fleet Management

• Track all vehicle metrics in real-time
• Implement predictive maintenance
• Optimize routes for fuel efficiency
• Monitor driver behavior
• Use telematics for theft prevention
• Maintain detailed service records
• Implement fuel management systems

Connected Vehicles

• Ensure secure V2X communication
• Implement robust cybersecurity
• Use encrypted data transmission
• Support OTA updates
• Monitor vehicle health continuously
• Provide driver assistance features
• Enable remote diagnostics

EV Management

• Optimize charging schedules
• Monitor battery health
• Provide range prediction
• Support multiple charging networks
• Implement thermal management
• Track total cost of ownership
• Enable smart grid integration

Safety and Compliance

• Follow ISO 26262 for safety-critical systems
• Implement fail-safe mechanisms
• Conduct regular safety audits
• Maintain compliance with emissions standards
• Support vehicle recall management
• Implement driver identification
• Provide emergency response features

Anti-Patterns

❌ No telematics or GPS tracking ❌ Reactive maintenance only ❌ Manual route planning ❌ Ignoring driver behavior data ❌ No vehicle diagnostics ❌ Poor fuel management ❌ Inadequate cybersecurity ❌ No OTA update capability ❌ Inefficient EV charging

Reference Documentation

Detailed material lives alongside this skill and is read on demand:

• Fleet Management System

Resources

• AUTOSAR: https://www.autosar.org/
• ISO 26262: https://www.iso.org/standard/68383.html
• SAE International: https://www.sae.org/
• OBD-II Standards: https://www.obdii.com/
• CAN Bus Specification: https://www.can-cia.org/
• Automotive Edge Computing Consortium: https://aecc.org/
• CharIN (EV Charging): https://www.charin.global/